Home › Engine codes › CLAB

CLAB 3.0 TDI 204hp

Engine code CLAB is a diesel, rated at 204 hp. It was fitted to 2 different Audi models, which is why the code matters more than the badge on the boot.

Cars fitted with CLAB

MakeModelGenerationPower
AudiA6C7 (2011–2018)204 hp
AudiA7C7 (2010–2018)204 hp

Which ECU it runs

CLAB is controlled by a Bosch EDC17CP04 / EDC17CP14 / EDC17CP44 engine control unit.

What goes wrong with this engine

The faults this engine is genuinely known for — and the timing arrangement, which decides a great deal about running costs — are covered in 3.0 TDI V6 problems.

Where to find your engine code

The three or four letter code is stamped on the engine block and is usually printed in the service book. It is also stored electronically, so any diagnostic tool that talks to the engine control unit will read it back without you having to find the stamping.

The code matters more than the model year. Cars of the same age and badge were built with different engines, and the timing arrangement, common faults and correct parts all follow the code rather than the year.

VAGPULSE reads your engine ECU's part number and software version, every stored fault and the live data behind it. $249 once, no subscription.

See VAGPULSE - $249 Look up a fault code
All engine codes · Fault codes · VAGPULSE

Common questions

What car has engine code CLAB?

CLAB was fitted to the Audi A6 C7 (2011–2018), the Audi A7 C7 (2010–2018).

What is engine code CLAB?

CLAB is a 3.0 TDI 204hp (diesel).

Which ECU does CLAB use?

CLAB runs a Bosch EDC17CP04 / EDC17CP14 / EDC17CP44 engine control unit.