Home › Engine codes › DKZC

DKZC 2.0 TFSI 200hp

Engine code DKZC is a petrol, rated at 200 hp. It was fitted to 2 different VW Group models, which is why the code matters more than the badge on the boot.

Cars fitted with DKZC

MakeModelGenerationPower
AudiA1GB (2018–2024)200 hp
VWPoloAW (2017–2024)200 hp

Which ECU it runs

DKZC is controlled by a Bosch MG1CS011 / MG1CS111 engine control unit.

What goes wrong with this engine

The faults this engine is genuinely known for — and the timing arrangement, which decides a great deal about running costs — are covered in EA888 1.8 and 2.0 TSI problems.

Where to find your engine code

The three or four letter code is stamped on the engine block and is usually printed in the service book. It is also stored electronically, so any diagnostic tool that talks to the engine control unit will read it back without you having to find the stamping.

The code matters more than the model year. Cars of the same age and badge were built with different engines, and the timing arrangement, common faults and correct parts all follow the code rather than the year.

VAGPULSE reads your engine ECU's part number and software version, every stored fault and the live data behind it. $249 once, no subscription.

See VAGPULSE - $249 Look up a fault code
All engine codes · Fault codes · VAGPULSE

Common questions

What car has engine code DKZC?

DKZC was fitted to the Audi A1 GB (2018–2024), the VW Polo AW (2017–2024).

What is engine code DKZC?

DKZC is a 2.0 TFSI 200hp (petrol).

Which ECU does DKZC use?

DKZC runs a Bosch MG1CS011 / MG1CS111 engine control unit.