HomeFault codes › 00741

00741 Brake Light / Brake Pedal Switch - Signal Correlation Error

Do not keep driving

Two sensors that should agree with each other do not, so the ECU cannot tell which one to trust.

Can you drive it? This affects a system that helps you stop or stay straight. Assume ABS and stability control are reduced or switched off until it is fixed.

The definition

00741: Brake Light / Brake Pedal Switch - Signal Correlation Error.

What to check first

Cheapest and fastest checks first:

  1. Read the freeze-frame data stored with the fault - engine speed, load and temperature at the moment it logged tell you whether this happens cold, hot or under load.
  2. Check the connector at the part for corrosion, and that it is fully seated.
  3. Clear the code and see whether it returns, and under what conditions.

Reading the code is the easy part

A code names the circuit that complained. What tells you why is watching the sensor behind it while the engine runs — and that is where a code reader stops and a diagnostic tool starts.

VAGPULSE reads every module in a VW, Audi, Skoda or SEAT — not just the engine — shows the live measuring blocks behind this fault, gives you the freeze-frame conditions it was logged under, and clears it once you have fixed it. It also does what a generic OBD reader cannot on a VAG: service resets, coding, adaptations, and Stage 1–3 flashing with your original file saved first.

$249 once. No subscription, unlimited cars. Windows 10/11.

See VAGPULSE — $249 Look up another code

Software downloads instantly · cable ships September 30 · cable guarantee — refund if it won't connect

Prefer to work on your phone? The VAGPULSE Android app is a free download and its demo mode runs against a sample car with no hardware at all, so you can see exactly what it reads before spending anything. Reading your car with it needs the VAGPULSE cable, which comes with the licence.

Common questions

What does 00741 mean?

00741 means Brake Light / Brake Pedal Switch - Signal Correlation Error. Two sensors that should agree with each other do not, so the ECU cannot tell which one to trust.

Can I drive with 00741?

This affects a system that helps you stop or stay straight. Assume ABS and stability control are reduced or switched off until it is fixed.

Related reading

← All VAG fault codes · Guides · VAGPULSE