B0010–B0011 Front Passenger Frontal Airbag Deployment Loop, Stage 1 (Igniter for Front Passenger Airbag -N131-) - circuit malfunction (open/short/resistance)
The ECU sees a problem in this circuit but cannot narrow it to a specific short or open. Start at the connector and the wiring before condemning the part.
Can you drive it? This is a restraint-system fault. The airbag or belt tensioner may not deploy in a crash, and in some failure modes may deploy when it shouldn't. Have it looked at before carrying passengers.
Which code is which
Same fault, different cylinder or bank — diagnosed the same way. Several set together usually means one shared cause.
| Code | Definition | Severity |
|---|---|---|
B0010 | Front Passenger Frontal Airbag Deployment Loop, Stage 1 (Igniter for Front Passenger Airbag -N131-) - circuit malfunction (open/short/resistance) | Safety system |
B0011 | Front Passenger Frontal Airbag Deployment Loop, Stage 2 (Igniter 2 for Front Passenger Airbag -N251-) - circuit malfunction (open/short/resistance) | Safety system |
The definition
B0010: Front Passenger Frontal Airbag Deployment Loop, Stage 1 (Igniter for Front Passenger Airbag -N131-) - circuit malfunction (open/short/resistance).
B0010 is a body code (an interior or comfort system), defined by the SAE standard - it means the same thing on any make of car, and any generic OBD-II reader will decode it.
What to check first
Cheapest and fastest checks first:
- Read the freeze-frame data stored with the fault - engine speed, load and temperature at the moment it logged tell you whether this happens cold, hot or under load.
- Check the connector at the part for corrosion, and that it is fully seated.
- Clear the code and see whether it returns, and under what conditions.
Reading the code is the easy part
A code names the circuit that complained. What tells you why is watching the sensor behind it while the engine runs — and that is where a code reader stops and a diagnostic tool starts.
VAGPULSE reads every module in a VW, Audi, Skoda or SEAT — not just the engine — shows the live measuring blocks behind this fault, gives you the freeze-frame conditions it was logged under, and clears it once you have fixed it. It also does what a generic OBD reader cannot on a VAG: service resets, coding, adaptations, and Stage 1–3 flashing with your original file saved first.
$249 once. No subscription, unlimited cars. Windows 10/11.
See VAGPULSE — $249 Look up another codeSoftware downloads instantly · cable ships September 30 · cable guarantee — refund if it won't connect
Prefer to work on your phone? The VAGPULSE Android app is a free download and its demo mode runs against a sample car with no hardware at all, so you can see exactly what it reads before spending anything. Reading your car with it needs the VAGPULSE cable, which comes with the licence.
Common questions
What does B0010 mean?
B0010 means Front Passenger Frontal Airbag Deployment Loop, Stage 1 (Igniter for Front Passenger Airbag -N131-) - circuit malfunction (open/short/resistance). The ECU sees a problem in this circuit but cannot narrow it to a specific short or open. Start at the connector and the wiring before condemning the part.
Can I drive with B0010?
This is a restraint-system fault. The airbag or belt tensioner may not deploy in a crash, and in some failure modes may deploy when it shouldn't. Have it looked at before carrying passengers.