P0960–P281B Pressure Control Solenoid A Control Circuit/Open
The circuit is broken somewhere - a cut wire, a corroded pin or an unplugged connector means the signal never arrives.
Can you drive it? The engine light will stay on and the car may run in a reduced-power mode. Read the freeze-frame data to see the conditions the fault was logged under.
Which code is which
Same fault, different cylinder or bank — diagnosed the same way. Several set together usually means one shared cause.
| Code | Definition | Severity |
|---|---|---|
P0960 | Pressure Control Solenoid A Control Circuit/Open | Investigate soon |
P0964 | Pressure Control Solenoid B Control Circuit/Open | Investigate soon |
P0968 | Pressure Control Solenoid C Control Circuit/Open | Investigate soon |
P2718 | Pressure Control Solenoid D Control Circuit/Open | Investigate soon |
P2727 | Pressure Control Solenoid E Control Circuit/Open | Investigate soon |
P2812 | Pressure Control Solenoid G Control Circuit/Open | Investigate soon |
P281B | Pressure Control Solenoid H Control Circuit/Open | Investigate soon |
The definition
P0960: Pressure Control Solenoid A Control Circuit/Open.
P0960 is a powertrain code (the engine or gearbox), defined by the SAE standard - it means the same thing on any make of car, and any generic OBD-II reader will decode it.
What to check first
Cheapest and fastest checks first:
- Check the connector is fully seated and the locking tab is engaged. A half-seated plug is the single most common cause of an open circuit.
- Back-probe the pins and check continuity from the part back to the module connector.
- Inspect for a pushed-back or corroded terminal - the wire looks fine but the pin has backed out of the housing.
Reading the code is the easy part
A code names the circuit that complained. What tells you why is watching the sensor behind it while the engine runs — and that is where a code reader stops and a diagnostic tool starts.
VAGPULSE reads every module in a VW, Audi, Skoda or SEAT — not just the engine — shows the live measuring blocks behind this fault, gives you the freeze-frame conditions it was logged under, and clears it once you have fixed it. It also does what a generic OBD reader cannot on a VAG: service resets, coding, adaptations, and Stage 1–3 flashing with your original file saved first.
$249 once. No subscription, unlimited cars. Windows 10/11.
See VAGPULSE — $249 Look up another codeSoftware downloads instantly · cable ships September 30 · cable guarantee — refund if it won't connect
Prefer to work on your phone? The VAGPULSE Android app is a free download and its demo mode runs against a sample car with no hardware at all, so you can see exactly what it reads before spending anything. Reading your car with it needs the VAGPULSE cable, which comes with the licence.
Common questions
What does P0960 mean?
P0960 means Pressure Control Solenoid A Control Circuit/Open. The circuit is broken somewhere - a cut wire, a corroded pin or an unplugged connector means the signal never arrives.
Can I drive with P0960?
The engine light will stay on and the car may run in a reduced-power mode. Read the freeze-frame data to see the conditions the fault was logged under.