HomeFault codes › P2566

P2566 Turbocharger Boost Control Position Sensor A Circuit Intermittent

Investigate soon

The fault comes and goes, which points at a connection that only breaks under vibration, heat or load.

Can you drive it? The car is most likely in limp mode with boost cut. It is drivable gently, but it will not make full power and should not be driven hard until it is fixed.

The definition

P2566: Turbocharger Boost Control Position Sensor A Circuit Intermittent.

P2566 is a manufacturer-specific powertrain code (the engine or gearbox). Its meaning is set by the carmaker rather than by the SAE standard, so a generic OBD-II reader will often show it as an unknown code or misread it.

What to check first

Cheapest and fastest checks first:

  1. Read the freeze-frame data stored with the fault - engine speed, load and temperature at the moment it logged tell you whether this happens cold, hot or under load.
  2. Check the connector at the part for corrosion, and that it is fully seated.
  3. Clear the code and see whether it returns, and under what conditions.

Reading the code is the easy part

A code names the circuit that complained. What tells you why is watching the sensor behind it while the engine runs — and that is where a code reader stops and a diagnostic tool starts.

VAGPULSE reads every module in a VW, Audi, Skoda or SEAT — not just the engine — shows the live measuring blocks behind this fault, gives you the freeze-frame conditions it was logged under, and clears it once you have fixed it. It also does what a generic OBD reader cannot on a VAG: service resets, coding, adaptations, and Stage 1–3 flashing with your original file saved first.

$249 once. No subscription, unlimited cars. Windows 10/11.

See VAGPULSE — $249 Look up another code

Software downloads instantly · cable ships September 30 · cable guarantee — refund if it won't connect

Prefer to work on your phone? The VAGPULSE Android app is a free download and its demo mode runs against a sample car with no hardware at all, so you can see exactly what it reads before spending anything. Reading your car with it needs the VAGPULSE cable, which comes with the licence.

Common questions

What does P2566 mean?

P2566 means Turbocharger Boost Control Position Sensor A Circuit Intermittent. The fault comes and goes, which points at a connection that only breaks under vibration, heat or load.

Can I drive with P2566?

The car is most likely in limp mode with boost cut. It is drivable gently, but it will not make full power and should not be driven hard until it is fixed.

Related reading

← All VAG fault codes · Guides · VAGPULSE